Free UK Delivery Over £60 Same-Day Dispatch 30-Day Money-Back Guarantee

International delivery coming soon Ordering from outside the UK? Contact us to order now

Join the Loki UK Club Programme for squad volume pricing, coach recommendations & priority dispatch.

Official UK Loki Distributor • ITTF Approved Range
First Bat Guide

Setting up your first custom table tennis bat

Moving from a pre-made shop bat to a custom setup means three separate decisions — blade, forehand rubber, backhand rubber — that all have to agree with each other. This guide walks through each choice in order, with three complete first setups at the end.

Wood before carbon Forehand / backhand matching ITTF approved

A pre-made bat’s rubber is glued on for good, usually with a dead sponge and a topsheet you can’t replace. A custom bat lets you choose and later swap each part separately — but only if the three parts are chosen to work together. This guide takes you through blade, forehand rubber and backhand rubber in that order, then gives three complete first setups built from real Loki stock.

Decision 01

Pick your blade first: wood before carbon

The blade sets the ceiling for feel and control before any rubber goes on.

A common mistake is buying a stiff, fast outer-carbon blade too early. Without a settled stroke, a stiff blade sends the ball off the far end of the table before your technique has caught up with it. An all-wood blade flexes on contact, giving longer dwell time, a more predictable arc, and direct feedback into your hand about where you actually made contact — exactly what a developing stroke needs.

5-ply all-wood

Loki Kirin K3

The usual first custom blade. Generous sweet spot and forgiving feedback for mastering pushes, drives and early loops.

7-ply all-wood

Loki Kirin K5

For players who want more pace without giving up wood dwell — two extra plies add stiffness for crisper drives.

Decision 02

Choose your forehand rubber

Your forehand is usually where you generate the most body rotation and the most spin.

Here the choice is between a tacky topsheet, which grips the ball and rewards a full swing with heavy spin, and a tensor sheet, which springs the ball back with less swing effort. See tacky vs tensor rubber, explained for the full mechanics.

Entry tacky

Loki Rxton 1 Max

A forgiving tacky sheet for learning active strokeplay, with enough grip for serves and forehand pushes.

Pro tacky

Loki Arthur China

Loki’s tackiest sheet, for a player already committed to building a heavy topspin loop game.

Decision 03

Choose your backhand rubber

A shorter, wrist-driven stroke often suits a different rubber to the forehand.

Because a backhand stroke has less body rotation behind it, many players run a softer, more elastic rubber on the backhand to absorb incoming topspin on blocks and add easy depth on punch drives.

Consistent control

Loki Rxton 3 Max

A versatile tacky sheet, slightly firmer than Rxton 1 Max, balancing punch counters with controllable pushes.

Tensor feel

Loki Arthur Europe

A non-tacky, springy sheet suited to backhand flicking and looping, for effortless counter-hitting.

Decision 04 & 05

Sponge thickness and handle shape

Sponge thickness

2.0–2.1mm (most common): A balance of wood feedback and rebound speed, giving full feeling on touch play without the ball flying off the table. Max (2.2mm): More top-end speed on a full swing, at the cost of some table touch and a slightly heavier bat.

Handle shape

Flared (FL): The most common shape, wider at the base of the handle to help stop the bat slipping during a topspin swing. Straight (ST): Uniform width, favoured by some defensive players and blockers who rotate the bat between points.

Curated setups

Three complete first setups

Blade and rubbers matched for balance and playability, built from the choices above.

Popular first bat
£41.97 complete setup

The all-round development setup

For a player stepping out of a pre-made recreational bat into club training. A wide safety margin on blocks, clean spin feedback and forgiving push placement.

Shop by Level →
Progressive attack
£43.97 complete setup

The offensive wood setup

For a player who already likes to attack the ball with pace. The 7-ply Kirin K5 adds power behind drives, with Rxton 3 Max on the forehand for a heavier spin arc.

Shop by Level →
Spin & inner composite
£76.97 complete setup

The intermediate composite attacker

For a player ready for inner-carbon speed without losing dwell time. Inner fibre under the K5 Pro Inner keeps wood feel, paired with the tackier Arthur China on the forehand.

Racket Configurator →

Every total above is Loki UK’s own live price for the three products added together, read from the product pages so it always matches what you’d pay at checkout — not a separate bundle price. Blades and rubbers ship as separate items for you to glue together with a water-based, VOC-free glue.

Looking after your first bat

Rubber tack and tension both fade with dust and time — a little care extends the life of a new sheet.

Storage

Loki Printed EVA Diamond Case

A hard shell that protects the bat from crushing and drops in a kit bag.

VOC-free glue

Loki Rxton Inorganic Glue “ONE” 100ml

Water-based glue compliant with ITTF and Table Tennis England rules for gluing rubber to blade.

Cleaner

Loki Rxton Foam Rubber Cleaner

Removes grease and table dust from the topsheet without drying out the rubber.

Common questions

How long will my first custom rubbers last?

For a club player training once or twice a week, a rubber typically holds good grip for several months to around a year. Cleaning dust off after every session and storing the bat in a case rather than loose in a bag both help it last longer.

Can I replace just one rubber later?

Yes — that’s the main advantage of a custom bat over a pre-made one. When a rubber wears out you peel it off and glue on a new sheet, without needing to replace the blade or the other wing’s rubber.

Why do tournament rubbers have to be red and black?

ITTF rules require one side of the racket to be black and the other a clearly different, approved colour, most commonly red. This lets an opponent see which side of the bat played a shot.

Can I use different rubbers on my forehand and backhand?

Yes, and it’s common practice. Many players run a tackier rubber on the forehand for heavier loops and a springier tensor rubber on the backhand for quicker blocks and flicks.

Ready to build your bat?

Pick your blade and rubbers in the Racket Configurator, priced live as you go, or find a complete setup by playing level.