Free UK Delivery Over £60 Same-Day Dispatch 30-Day Money-Back Guarantee

International delivery coming soon Ordering from outside the UK? Contact us to order now

Join the Loki UK Club Programme for squad volume pricing, coach recommendations & priority dispatch.

Official UK Loki Distributor • ITTF Approved Range
Blade Engineering Guide

The UK table tennis blade guide: anatomy, woods & composites

What plies, face veneers, composite fibre placement and thickness actually change about feel and stroke recovery — explained against real blades from the Loki range, from 5-ply all-wood control bats to outer-carbon attack blades.

5-ply vs 7-ply Inner vs outer carbon ITTF 85% wood rule
5–7 plies
Typical wood layer count
85%
Minimum natural wood by ITTF rule
Inner / Outer
Two carbon placements
10
Fibre families across the range

A blade sets the ceiling for control, stiffness and dwell time before any rubber goes on. This guide walks through how a blade is actually built, what each wood and fibre choice changes in play, and which Loki blades sit at each stage — from a first all-wood bat through to an outer-carbon attacking blade.

How a blade is built

Almost every modern blade is a symmetrical sandwich of layers around a central core.

Face veneer

The visible outer wood layer directly under the rubber. Sets surface touch and how quickly the ball releases.

Power plies

The wood or fibre layers between the face and the core. They add bending stiffness and carry energy through the swing.

Core

The thickest central ply, usually a lighter wood, which sets most of the blade’s overall weight and flex.

Composite layer

An optional carbon or fibre sheet woven either side of the core to widen the sweet spot and cut energy loss off-centre.

The woods and what each one changes

Different veneers and core woods give a blade a distinct playing personality.

WoodRoleFeelPlaying characteristic
LimbaFace veneerSoft, elasticWarm touch with extended dwell — the classic looping face wood, letting the ball sit on the rubber before release.
KotoFace veneerMedium-hard, crispBrighter, more direct rebound for close-to-table hitters and counter-players who want a quick release.
AyousPower ply / coreMedium, flexibleElastic without adding much weight, absorbing heavy shots and returning power progressively.
Kiri (Paulownia)CoreVery light, stiffLow density lets a blade run thicker while keeping total weight down — useful where hand speed matters more than raw thickness.
Ebony / RosewoodFace veneerVery hard, denseStiff, hard-contact veneers used where a flatter, faster drive trajectory is wanted over flex.

1. All-wood blades: ball feeling, feedback and control

With no synthetic fibre, an all-wood blade transmits vibration straight through the handle, which is why they’re the usual starting point while a player’s technique is still forming.

5-ply all-wood

Loki Kirin K3

5-ply Limba and Ayous construction. High flex and extended dwell time give plenty of margin for error on opening loops while technique is still developing.

7-ply all-wood

Loki Kirin K5

Two extra wood plies add stiffness and driving speed over the K3, without introducing composite feel — for players who want punchier drives on pure wood.

2. Inner-carbon blades: controlled spin and a second gear

Fibre placed next to the core, under two layers of natural veneer, gives two distinct feels depending on shot commitment.

Why inner carbon feels like “two gears”

On soft touch shots and blocks, the ball mostly compresses the outer wood veneers, so the blade feels close to an all-wood bat. On a fully committed drive, the ball compresses further into the inner composite layer, adding a distinct extra burst of pace — useful for players who need touch on the push but power on the loop.

Inner GNF fibre

Loki Kirin K5 Pro Inner

Inner fibre next to a Limba face keeps a soft wood feel on short balls, with a wider sweet spot on committed loops against heavy backspin.

Inner Aramid Carbon

Loki W81 Wei Shihao ADC

Inner Aramid Carbon next to an Ayous core. Built for higher-level offensive play, with a long dwell that suits players who load spin before releasing it.

3. Outer-carbon blades: crisp speed for close-to-table play

Fibre placed directly beneath the face veneer engages the instant the ball makes contact, for a more immediate rebound.

Outer carbon

Loki Kirin K5 Pro Outer

Carbon sits right under the face veneer for a direct, high-velocity feel — suited to aggressive close-to-table hitting and active blocking.

Outer Aryl Carbon

Loki W81 Wei Shihao ARC

5-ply wood plus 2 outer Aryl Carbon. A crisp, direct rebound and a broad sweet spot for players who generate their own pace.

Throw angle: why the same speed can play differently

Throw angle describes the trajectory a blade sends the ball on, independent of raw speed.

A low-throw blade tends to send the ball on a flatter, more direct path, rewarding a player who supplies their own arc and topspin. A higher-throw blade launches the ball on a more arcing trajectory, giving more natural clearance over the net for players still building consistent topspin technique. Stiffer, more carbon-forward constructions (outer ARC/ADC builds) generally throw lower and flatter than a softer all-wood blade like the Kirin K3, which is one reason a beginner is usually better served starting on wood before moving to a stiffer composite.

ITTF tournament legality: the 85% natural wood rule

The ITTF sets no approval list for blades the way it does for rubber coverings. Instead, legality is compositional: at least 85% of the blade’s thickness must be natural wood. Every blade in the Loki range is built to sit within that rule — the carbon or fibre layer is a thin reinforcement either side of the wood, never a replacement for it — so a Loki composite blade is described as tournament legal under ITTF construction rules, the correct wording for a blade rather than the “ITTF Approved” mark used on rubber coverings.

Common questions

What’s the practical difference between 5-ply and 7-ply blades?

Two extra wood plies generally add stiffness and driving speed at the cost of a little flex and forgiveness. A 5-ply blade like the Kirin K3 gives more margin while a stroke is still developing; a 7-ply blade like the Kirin K5 rewards a more committed, already-consistent stroke.

Should I choose an inner-carbon or outer-carbon blade?

Inner carbon (placed next to the core) keeps more wood touch on soft shots and adds power mainly on committed drives. Outer carbon (placed under the face veneer) engages immediately, giving a crisper, more direct rebound suited to close-to-table hitting. Neither is “better” — it depends on whether your game needs touch-then-power or immediate speed.

Are carbon composite blades legal for Table Tennis England league play?

Yes. The ITTF’s blade construction rule requires at least 85% natural wood by thickness, and every blade in the Loki range is built within that limit, so all of them are tournament legal under ITTF construction rules.

What does “throw angle” mean on a blade?

It describes the trajectory the blade sends the ball on, separately from raw speed. A lower-throw blade gives a flatter path that rewards a player supplying their own topspin arc; a higher-throw blade launches the ball on more of an arc, which helps clear the net while topspin technique is still developing.

Which Loki blade should a beginner start with?

An all-wood blade such as the Kirin K3 is the usual starting point — the flex and dwell time give more forgiveness while stroke technique is still forming, before moving on to an inner-carbon blade like the Kirin K5 Pro Inner as consistency builds.

Find your blade

Browse the full blade range, or let Shop by Level put together a complete setup for your playing stage.